Wear parts center

Grinding table


We can provide you with various brands of Grinding table , also can customize and produce according to your working conditions

The vertical mill liner is divided into concave, flat plate and bowl type, which correspond to the tire type, taper and cylinder type of the grinding roller respectively. Commonly found in the market are concave and flat table.

The table is rotated by the speed reducer, and the material falling on the center of the disc is dispersed by the centrifugal force to the gap between the grinding roller and the disc and subjected to the squeezing friction to achieve the purpose of grinding the powdery material.

At present, in order to extend the life cycle and reduce costs, welding rods made of wear-resistant materials are often used for surfacing on the surface of the grinding table. Achieve the effect of multiple use of a single table. Surfacing layer can adapt to a variety of working conditions, avoiding the need to replace the entire table due to changes in working conditions.


The Grinding table we have already produced


Flat plate type medium carbon steel grinding table

Flat plate type medium carbon steel grinding table

Flat plate type medium carbon steel grinding table

we can provide comprehensive material selection for you


High chromium iron

Feature:

We use proper alloying and and related technological measures to make the blow bars’ surface hardness reaches more than 58HRC ,  during the process of wearing will maintain high hardness and high wear resistance.

Technology process

In blow bars’ working part we use the technique of directional solidification to make Cr7C3 type carbide is perpendicular to the part.The macro-hardness and micro hardness of carbide can be improved without reducing thoghness.

Application

Suitable for making wearable spare parts with lower impact load and simpler shape.

Chemical component


Grade
Chemical component%
C Si Mn Cr Mo Ni Cu S P
BTMCr15   2.0~3.3    ≤1.2     ≤2.0     14~18    ≤3.0    ≤2.5    ≤1.2    ≤0.06    ≤0.10   
BTMCr20 2.0~3.3 ≤1.2 ≤2.0 18~23 ≤3.0 ≤2.5 ≤1.2 ≤0.06 ≤0.10
BTMCr26 2.0~3.3 ≤1.2 ≤2.0 23~30 ≤3.0 ≤2.5 ≤2.0 ≤0.06 ≤0.10
1:Allowed to add microscale V,Ti,Nb,B and Re etc.
2:We will choose grade and specific component according to blow bars’ weight ,thickness and sizes

 Mechanical Property

    Grade                                                   Surface Hardness

Casting condition

Harded condition

Softening annealing condition
HRC HB HRC HB HRC HB
  BTMCr15 ≥46 ≥450 ≥58 ≥650 ≥41 400
BTMCr20 ≥46 ≥450 ≥58 ≥650 ≥41 400
BTMCr26 ≥46 ≥450 ≥58 ≥650 ≥41 400
1:There are no exact corresponing value between rockwell hardness(HRC) and brine hardness(HB),so ,this two kind of hardness value can be inspend used 。
2:The hardness in the 40%deepness of casting section should be lower than 92% hardness of surface.
High manganese steel

Feature

High manganese steel refers to high alloy steels containing more than 10% manganese. The biggest features of high-manganese steel are:

The greater external compressive stress or impact load, the more conducive to the formation of hardened layer, so the higher the wear resistance of the casting;

With the gradual wear of the hardened layer, new work hardened layers will continue to form under the influence of external compressive stress or impact loads. Therefore, it is suitable for making wearable spare parts that are subject to high impact load and wear for a long time, and is widely used in metallurgy, mining, building materials, railways, electric power, coal and other broken grinding equipment.

 Chemical component


      Grade
                   Chemical component%
C Si Mn Cr S P
ZG120Mn13 1.05~1.35    0.3~0.9    11~14    - ≤0.06    ≤0.04   
ZG120Mn13Cr2 1.05~1.35 0.3~0.9 11~14 1.5~2.5   ≤0.06 ≤0.04
ZG120Mn17Cr2 1.05~1.35 0.3~0.9 16~19 1.5~2.5 ≤0.06 ≤0.04
1:Allowed to add microscale V,Ti,Nb,B and Re etc.
2:We will choose grade and specific component according to blow bars’ weight ,thickness and sizes

Mechanical Property


Grade
                                                                                Stretch property Hardness
HB
yield strength ReH/Mpa tensile strength Rm/Mpa Elongation at cross section% Shock absorption energyKu2J
ZG120Mn13 - ≥685 ≥25 ≥118 ≤300
ZG120Mn13Cr2 ≥390 ≥735 ≥20 - ≤300
Medium alloy steel

Feature

The alloy structure cast steel is an iron-carbon alloy formed by adding an appropriate amount of one or more alloy elements on the basis of ordinary carbon steel.

Process technology

According to the different elements added, with appropriate smelting and heat treatment process to obtain high strength, high toughness, high wear resistance, corrosion resistance, low temperature resistance, high temperature resistance, non-magnetic and other related special properties.

Scope of application

It is suitable for producing the wear-resisting spare parts with good mechanical strength and good toughness that are required for various working conditions, and the main steel structure castings with the required dynamic load.

 Chemical component


Grade
                                 Chemical component%
C Si Mn Cr Mo S P Ai
ZG42CrMo 0.38-0.43    0.15-0.35    0.75-1.00    0.80-1.10     0.15-0.25     <0.04    <0.035     -
ZG35CrMo 0.32~0.40 0.17~0.37 0.40~0.70 0.80~1.10 0.15~0.25 ≤0.035 ≤0.035 -
ZG38CrMoAl 0.35~0.42 0.20~0.45 0.30~0.60 1.35~1.65 0.15~0.25 ≤0.04 ≤0.04 0.7~1.1
ZG40Cr 0.37~0.45 0.17~0.37 0.5~0.8 0.8~1.1 - - - -
ZG30Mn2SiCrMo 0.25~0.35 0.40~0.80 1.20~1.60 1.35~1.65 0.2~0.5 ≤0.04 ≤0.04 -

 Mechanical Property

 Grade tensile strength(Mpa) yield strength (Mpa) Elongation at cross section(%) reduction of crosssection area(%) Shock absorption energy(KV2/J)
ZG42CrMo ≥1080 ≥930 ≥12 ≥20 ≥24
ZG35CrMo ≥985 ≥835 ≥12 ≥20 ≥24
ZG38CrMoAl ≥980 ≥835 ≥14 ≥20 ≥24
ZG40Cr ≥980 ≥785 ≥9 ≥20 ≥24
ZG30Mn2SiCrMo ≥1500 ≥1300 ≥3 - ≥24

 

Crusher brand accessories we accept customized


UBE Japan Fuller USA Losche Germany Liming Heavy Industry China Pfeiffer Germany A-C USA
Shenyang Heavy Industry China F.L.Smidth Denmark Kawasaki Japan Sket Germany Raymond USA Mitsubishi  Japan
Humboldt Germany IHI Japan Polusius Germany Hefei cement research&design institute  (HRM) Changshu Jiankuang China(CJRM) Jiangsu Pengfei(PRM)

Customer case


Our Australia customer visit our factory

Learn More

Our agent from Latvia

Learn More

Luoyang Zhili cooperated with Lafarge-holcim cement group in India

Learn More
Sustainable development

Lear that Our efforts for the local ecology

Strict quality control

Learn that how we can make the the products more wear resistant

Abundant value-added services

Help you maximize your business profits